Monitor Control via Serial Port
This is optional feature of the monitor.
User can control multiple monitors via serial port on the back. Connect PC and monitor with RS-
422 (general telephone cable), using an appropriate gender. (e.g. a RS-232C to RS-422 gender, or a
USB to RS-232C to RS-422 gender)
In most cases this kind of gender is needed because PC does not have phone port, but RS-232C port
or USB.
PC Software BWS-100 will be provided as request.
USB Firmware Update
To update your monitor's firmware, request for a new firmware file to your local reseller or to BON
Electronics.
Move the file on a USB flash memory, insert it to your monitor. Please beware the file should be
located
in the root(top folder level)
.
Also, the USB flash memory
should have
FAT32 or FAT
file system. (USB memory has FAT32
file system, usually)
Set Update Firmware item as USB from SYSTEM menu.
Some part of firmware cannot be updated by USB updating procedure, so please get help
from your local dealer or expert before you update firmware with USB memory.
Error Message when USB access
or file not exist
Message when file on USB
detected
You can also use Serial Port and your PC to update the firmware. Please request for help to your
local dealer or directly to BON Electronics.
24
Adaptor (RS-232C to RS-422 Converter)
PC
(Wall System Controller)
BWS-100
