Bompani BOLF12B, Инструкция по эксплуатации

Страница: 8 / 26

1. The salt container must only be refilled when the salt warning light in the control panel comes on.
Depending on how well the salt dissolves, the salt warning light may still be on even though the
salt container is filled.
If there is no salt warning light in the control panel (for some Models),you can estimate when to fill
the salt into the softener by the cycles that the dishwasher has run.
2. If there are spills of the salt, a soak or a rapid program should be run to remove the excessive salt.
Always use the salt intended for use with dishwasher.
The salt contain er is located beneath the lower basket and should be filled as explained
in the following:
Attention!
Only use salt spe cifically designe d for the use in dishwashers! Every other type of
salt not specifically de sig ned fo r the u se in a d ishwasher, espe cially table salt, will
damage the water softener. In case of damages caused by the use of unsuitable
salt the ma nufacturer does not give any wa rranty nor is liable for any damages caused.
Only fill with salt just b efore starting one of the co mp lete washing p rograms.
This will prevent any g rains of salt or salty wate r, which ma y have been spilled,
remaining on the bottom of the machine for any period of time, which may cause
corrosion.
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can
leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is
designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser.
To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely
black. The volume of the rinse aid container is about 110ml.
Rinse Aid Dispenser
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.
Attention!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances
(e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.
A Remove the lower basket and then unscrew and remove the cap from the salt container.
B Place the end of the funnel(supplied) into the hole and introduce about 1.5kg of dishwasher salt.
C Full fill the salt container with water.It is normal for a small amount of water to come out of the salt container.
D After filling the container , screw the cap tightly back clockwise.
E Usually, the salt warning light will stop being illuminated within 2-6 days after the salt container has been filled with
salt.
F Immediately after filling the salt into the salt container, a washing program should be started
program Otherwise the filter system, pump or other important parts of the machine may be damaged
by salty water. This is out of warranty.
(We suggest to use the
soak or rapid ).
0QFO