BOMBARDIER SEA-DOO GTX RFI 5666 1998, Руководство пользователя

Страница: 8 / 47

Section 01 MAINTENANCE
Subsection 03 (FLUSHING AND LUBRICATION)
01-03-2
Start the engine then immediately open the water
tap.
Run the engine about 3 minutes at a fast idle
around 3500 RPM.
Spray BOMBARDIER LUBE lubricant through air
intake silencer keeping engine at fast idle.
1. Air intake silencer
2. Pull plug
3. Spray BOMBARDIER LUBE here
NOTE: Lubrication of engine should be done at
least for 1 minute.
Close the water tap then stop the engine.
Disconnect the garden hose.
Wipe up any residual water from the engine.
Remove spark plug cables and connect them on
the grounding device near the tuned pipe.
1. Grounding device
Remove both spark plugs and spray BOMBAR-
DIER LUBE lubricant into each cylinder.
NOTE: For the storage period, use Bombardier
storage oil (P/N 413 711 600).
Fully apply the throttle lever then depress the
start/stop button to crank the engine a few turns
to distribute the oil onto cylinder wall.
Apply anti-seize lubricant on spark plug threads
then reinstall them.
Reinstall plug on air intake silencer cover.
NOTE: Engine fogging should be done whenever
the watercraft is to be stored for a few days or a
long period.
;
WARNING
Do not touch any electrical parts or jet pump
area when engine is running.
-
CAUTION
Never flush a hot engine. Always start the
engine before opening the water tap. Open
water tap immediately after engine is start-
ed to prevent overheating.
-
CAUTION
Always close the water tap before stopping
the engine.
-
CAUTION
Remove quick connect adapter after flush-
ing operation (if used).
F01F25A
1
2
3
;
WARNING
Always use spark plug cable grounding de-
vice when removing spark plugs.
-
CAUTION
Never leave rags or tools in the engine com-
partment or in the bilge.
F07H0AA
1