BOMBARDIER 2005 DS50, Руководство оператора, Страница: 70 / 113

BREAK-IN PERIOD
Engine
4-Stroke Models
A break-in period of 10 operating hours
is required before running the vehicle
at sustained full throttle.
CAUTION:
Never mix oil with fuel.
During this period, maximum throttle
should not exceed 3/4. However, brief
full acceleration and speed variations
contribute to a good break-in. Contin-
ued wide open throttle accelerations,
prolonged cruising speeds and engine
overheating are detrimental during the
break-in period.
2-Stroke Models
To insure maximum durability and opti-
mal performance and to avoid engine
damage, please pre-mix the first four
tanks of fuel with two-stroke engine oil
at 30:1 ratio. Do not operate the ATV
at more than half throttle for the first
three hours. During the break-in pe-
riod (first four tanks of fuel), operate
the vehicle at various RPM and do not
operate the vehicle above half throttle
for extended periods.
Belt
2-Stroke Models
A new belt requires a break-in period
of 50 km (30 miles). Avoid strong ac-
celeration/deceleration or high speed
cruising.
10-Hour Inspection
As with any precision piece of me-
chanical equipment, we suggest that
after the first 10 hours, 400 km (250
m.) or 30 days after the purchase,
whichever comes first, your vehicle
be inspected by an authorized Bom-
bardier ATV dealer.
This inspection
will give you the opportunity to dis-
cuss the unanswered questions you
may have encountered during the first
hours of operation.
The 10-hour inspection is at
the expense of the vehicle
owner.
While reading this Operator’s Guide, remember that:

WARNING
Indicates a potential hazard that, if not avoided, could result in serious in-
jury or death.
70
______________________