33
1. Headlight dimmer switch
9) Indicator Lights Cluster
NOTE:
When first turning switch to
ON (either position), all indicator lights
will turn on for a brief moment. This
validates their operation. Thereafter,
only the lights that are activated will
remain on (Reverse or Neutral, gear
position and engine indicator lights). If
all lights flash, it indicates a particular
malfunction of the transmission or the
electrical system. See an authorized
Bombardier ATV dealer as soon as
possible.
Gear Position Display
Located on left side of cluster. It lights
up to indicate the gear position when-
ever the ignition switch is turned on
when the transmission lever is NOT in
PARK or in NEUTRAL position (either
engine running or not).
If all lights flash
while shifting gear
, it
indicates the shifting is not completed
yet. Simply wait until the shifting com-
pletes or retry the shift with the gear
shift button.
If all lights flash
continuously
, it indi-
cates a damaged sensor (gearbox). Al-
though the vehicle can still be operat-
ed in this condition, downshifting may
increase engine “braking”. Drive
slowly. See an authorized Bombardier
ATV dealer as soon as possible.
1. Gear position display
Other Indicator Lights
Located on right side of cluster. They
light up to monitor different functions.
If REVERSE and NEUTRAL lights flash
simultaneously,
while setting the
transmission lever
, it indicates the
selection is not completed yet. The
gears in the transmission are not prop-
erly aligned. Simply retry to move the
transmission lever. If it does not work,
try rocking the vehicle back and forth
to move the gears in the transmission
then retry.
If all lights flash
continuously
, it indi-
cates a damaged sensor (sub-trans-
mission). Although the vehicle can still
be operated in this condition, down-
shifting may increase engine “brak-
ing”. Drive slowly. See an authorized
Bombardier ATV dealer as soon as
possible.
V01I070
1
1
V01I08Y
vmo9903a.book Page 33 Wednesday, December 23, 1998 8:12 AM