Bomar Practix Automatic 285.230 GA, Руководство по эксплуатации

Страница: 33 / 127

33
Ovládá
ní str
o
je
Bedi
en
ung
der
Masch
ine
Machine control
A
Button for starting of the control (safety) circuits
The button switches on the control circuits of the control system. Starting of the circuits is
signalized by light in the button.
B
Machine mode switch
– test mode of the machine
– automatic operation mode
. – manual operation mode
C
Cooling switch
– switch off the cooling, e.g. for cast iron cutting
– standard cooling by the cooling fluid
– micronization (optional accessory)
D
TOTAL STOP button
Stops the machine immediately in emergency
E
Setting of the frame lowering speed
Continuous setting of lowering of the frame into the cut.
F
START button
Starts automatic/semi-automatic cycle.
G
STOP button
Stops automatic/semi-automatic cycle..
H
Cutting speed switch
For selection of the saw band speed during cutting. Selection 1 for speed 35, selection for
speed 72 m. min
-1
0
Button 0 – num. value / no function in manual mode
1
Button 1 – num. value / in manual mode – clamp feeding vice
2
Button 2 – num. value / in manual mode – clamp main vice
3
Button 3 – num. value / in manual mode – frame up
4
Button 4 – num. value / in manual mode – release feeding vice
5
Button 5 – num. value / in manual mode – release main vice
6
Button 6 – num. value / in manual mode – frame down
7
Button 7 – num. value / in manual mode – switch on/off motor for saw band drive
8
Button 8 – num. value / in manual mode – switch on/off hydraulic aggregate
9
Button 9 – num. value / no function in manual mode
10
Button for feeder forward movement
11
Text LCD
With 2x16 characters shows all necessary data and questions for machine operation
12
No function
13
Button for feeder backward movement
14
Button for switch in help for control / for entering numerical values – decimal point
15
Button ENTER – confirm data (values or selection)