BOMANN WA 7174, Инструкция по эксплуатации

Страница: 27 / 44

27
NOTE:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter
“Cleaning and Maintenance”
.
Appliance equipment
Appliance overview
1 Control panel
2 Appliance door
3 Maintenance cover
4 Feet
5 Detergent dispenser
Delivery scope
1x inlet hose, 1x hose retaining bend, 4x transport
locking covers, 1x wrench
Installation
WARNING:
The unit must not be connected to the mains during
installing. Otherwise, there is danger to life or electric
shock hazard!
CAUTION:
For a correct operation the appliance must be con-
nected properly. The specifications for water supply
and drain as well as the electrical connection must
fulfill the required criteria.
Remove the transport locking screws
CAUTION:
• Before using, all transport locking screws must be
removed from the appliance back. Otherwise, it
may cause serious damages.
•
Keep the transport locking screws for later use /
transport. Never transport the appliance without
properly attached transportation safety!
•
Unscrew the four transport bolts by approx.
30 mm using the supplied wrench.
•
Press the bolts respectively inwards and loosen.
•
Remove the four transport bolts to the front.
• Insert the enclosed cover caps.
• Before further transport: Reinsert the transport
bolts in reverse order.
Installation location
•
The site should be located near the water inlet
and outlet, as well as near a properly grounded
power socket.
•
Good ventilation around the appliance is required,
to dissipate the heat properly. Enough clearance
must be created for this purpose.
• The free space in front of the unit should be so
that the appliance door can be opened without
hindrance.
•
Make sure that the floor on which the appliance is
installed, is even, heat-resistant and clean.
•
Take care of a solid and horizontal position of the
appliance. If the appliance is not horizontally lev-