25
•
When the ice has melted, wipe the condensate
away and dry the appliance interior.
•
Then you may restart the appliance by connecting
the plug and turning the temperature control.
Changing the bulb
CAUTION:
Do NOT remove the cover of the interior light.
The LED light may be replaced / repaired in case of
failure / defect only by an authorized specialist.
Troubleshooting
Before you contact an authorized specialist
Problem
Cause / Action
Unit is not
working
properly or
at all
∙
Check the power supply / tempera-
ture setting / ambient temperature.
∙
Unblock the ventilation openings,
install the unit freely.
Loading is
too warm
∙
Check the temperature setting /
ambient temperature.
∙
Open the
door only as long as necessary.
Problem
Cause / Action
Loud noise
during op-
eration
∙
Check the appliance position.
∙
See the section
“Operating noise”.
Water on
the unit
bottom
∙
Check the temperature setting /
water discharge channel or opening.
Light does
not work
∙
Check the power supply.
∙
See
“Changing the bulb”
.
NOTE:
If a problem persists after following the steps above,
contact your trader or an authorized technician.
Technical Data
Climate class N/ST: this appliance is intended to be
used at ambient temperature ranging from 16°C to
38°C.
Electrical connection………………...…………………..
Power voltage: ………………...….220-240 V~ / 50 Hz
Rated power: ……………….….…………....…...100 W
Rated current: …………………………………....0.75 A
Dimension H x W x D / Weight…..…...………………..
Appliance size: ……….….….....85.0 x 55.0 x 58.0 cm
Net weight: ………………………….…approx. 28.0 kg
For more information about the product, scan the QR
code on the supplied energy label and/or visit the
official website of the product data bank:
The right to make technical and design modifications
during continuous product development remains
reserved.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.