BOMANN KG 7327, Инструкция по эксплуатации

Страница: 20 / 28

20
•
Make sure that the voltage supply matches the
specifications on the rating label before connect-
ing.
•
Connect the mains cable to a properly installed
and earthed wall outlet.
•
If the plug after installation is not accessible, a
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.
R
R R
Reversing t
eversing t eversing t
eversing the door opening
he door opening he door opening
he door opening
If required, the door openings can be moved from the
right (supplied condition) to the left side.
W W W WARNING: ARNING: ARNING: ARNING:
When replacing the door stops, the appliance must
be disconnected from the power supply first.
NOTE
NOTE NOTE
NOTE::::
•
Ask another person to assist.
•
You possibly need:
screw wrench, Phillips screw-
driver as well as a thin-blade screwdriver.
•
*Delivery scope!
Keep the parts to be replaced for another possible
door stop change.
•
Remove the hinge cover and the blanking cap.
•
Dismount the upper door hinge and lift out the
fridge door.
•
Transfer the doorstop on the door underside and
set it safely aside.
•
Dismount the middle door hinge and lift out the
freezer door.
•
Transfer the doorstop on the door underside and
set it safely aside.
•
Tilt the device slightly backwards and lock it in
this position. Unscrew the feet and disassemble
the lower door hinge.
•
Transfer and fasten the lower door hinge to the
opposite device side after unscrewing the hinge