BOMANN GS 2186, Инструкция по эксплуатации

Страница: 19 / 24

19
•
The seal of the appliance door must be complete-
ly intact, so that the door closes properly.
Cleaning and Main Cleaning and Main Cleaning and Main Cleaning and Maintenance tenance tenance tenance
WARNING:
WARNING: WARNING:
WARNING:
•
Always switch off and disconnect the appliance
from the power supply before cleaning and user
maintenance.
•
Do not use steam cleaners for cleaning the appli-
ance; moisture could enter electrical components.
Risk of electric shock!
Risk of electric shock! Risk of electric shock! Risk of electric shock! Hot steam could damage
the plastic parts.
•
The appliance must be dry before restarting oper-
ation.
CAUTION:
CAUTION: CAUTION:
CAUTION:
•
Do not use a wire brush or other sharp, abrasive
items.
•
Do not use any acidic or abrasive detergents.
•
Do not damage the refrigerant circuit.
Cleaning the Cleaning the Cleaning the Cleaning the appliance including interior appliance including interior appliance including interior appliance including interior
•
Clean the appliance interior, the exterior surfaces,
the accessories and the door seal regularly with
warm water and mild detergent.
•
Remove for that the appliance content and stor-
age at a cool location.
•
After everything was thoroughly dried, you can
restart the operation.
Defrosting Defrosting Defrosting Defrosting
CAUTION CAUTION CAUTION CAUTION::::
Never use metal objects (e.g. knifes) to remove ice
from the evaporator. Otherwise it can be damaged.
A defect evaporator can cause serious damage.
To achieve better cooling and to save energy, defrost
the appliance regularly as follows:
•
To start the defrosting process, disconnect the
appliance from the power supply.
•
Remove the food items and keep covered at a
cool location.
•
When the ice has melted, wipe the condensate
away and dry the appliance interior.
•
Then you may restart the appliance by connecting
the plug and turning the temperature control.
Troubleshooting
Troubleshooting Troubleshooting
Troubleshooting
Before you contact an authorized specialist Before you contact an authorized specialist Before you contact an authorized specialist Before you contact an authorized specialist
Problem Problem Problem Problem Cause / Action Cause / Action Cause / Action Cause / Action
Appliance is
not working
or not
properly
-
Insert the power plug correctly or
check the fuse.
-
Check the temperature setting.
-
Check the ambient temperature.
- Unblock the ventilation openings,
install the appliance freely.
Stored food
is too warm
-
Check the temperature setting.
-
Open the door only as long as neces-
sary.
-
Check the location.
Loud noise
during oper-
ation - Check the appliance position.
- See the section “Operating noise”.
Water on the
appliance
bottom Check the temperature setting.
Water on the
outer surface On days of high humidity, condensation
might occur on the outer surface of the
appliance. No malfunction!
NOTE: NOTE: NOTE: NOTE:
If a problem still persists after following the steps
above, contact your trader or an authorized techni-
cian.