9
2222 Cooking zone power control lamp
Cooking zone power control lamp
Cooking zone power control lamp
Cooking zone power control lamp
The power control lamp indicates the operation of the
cooking zones. It lights up as soon as a cooking zone
is put into operation and goes off if all level regulators
points to the off-position.
3333 Oven
Oven
Oven
Oven function selector switch
function selector switch
function selector switch
function selector switch
The function selector switch is used to set the type of
heating. Rotate the function selector switch until the
icon for the desired type of heating points upwards.
4444 Oven temperature selector switch
Oven temperature selector switch
Oven temperature selector switch
Oven temperature selector switch
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Turn the temperature selector switch only clockwise
and back again. Otherwise the switch will be dam-
aged.
The temperature selector switch is used to adjust the
oven temperature. The thermostat allows the tem-
perature setting from 50°C to 250°C.
5555 Oven
Oven
Oven
Oven temperature control lamp
temperature control lamp
temperature control lamp
temperature control lamp
The temperature control lamp indicates the heating
operation. If the lamp goes off, the set oven tempera-
ture is reached.
During operation, the oven must continuously reheat
to keep the temperature stable. When reheating the
control lamp is lighting (thermostat function).
NOTE
NOTE
NOTE
NOTE::::
If the recipe recommends putting the food in the pre-
heated oven only, this should not be done before the
control lamp turns off for the first time.
6
6
6
6 Digi
Digi
Digi
Digittttal timer with LED Display
al timer with LED Display
al timer with LED Display
al timer with LED Display
1111 Auto function symbol
2222 Symbol manual
operation
3333 Point symbol
4444 Symbol minute minder
5555 Manual operation
6666 Reduce / increase
the time
The time and the various functions of the timer are
set via the display. Use the buttons (6
(6
(6
(6)))) to make the
settings:
After connecting to the power supply, the display
shows [00•00] and the dot symbol (3)
(3)
(3)
(3) flashes:
-
first select the beep volume
-
and then set the time of day to put the appliance
into operation.
Set the beep volume
Set the beep volume
Set the beep volume
Set the beep volume
You have the option of selecting 3 loudness levels.
•
While the point symbol (3)
(3)
(3)
(3) is flashing, you can
select the volume level using the (+)
(+)
(+)
(+) button.
Setting the time
Setting the time
Setting the time
Setting the time
Set the current time of day:
•
Press the button (5
(5
(5
(5)))) for manual operation for
about 3 seconds to set the time of day. The oper-
ation symbol (2)
(2)
(2)
(2) is lighting.
•
If the point (3)
(3)
(3)
(3) between hour and minute is flash-
ing, you can make the adjustment with the but-
tons (6
(6
(6
(6)))).
Manual operation
Manual operation
Manual operation
Manual operation
To operate the oven, press the button (5)
(5)
(5)
(5) for 3 sec-
onds and the appliance will switch to the manual
operation (operation without setting the timer func-
tions). As long as the symbol (2)
(2)
(2)
(2) is lighting, the man-
ual operation is activated.
Timer functions
Timer functions
Timer functions
Timer functions
GENERAL NOTES to the timer functions
GENERAL NOTES to the timer functions
GENERAL NOTES to the timer functions
GENERAL NOTES to the timer functions
•
As long as the point (3)
(3)
(3)
(3) flashes between hour and
minute, you can adjust the setting.
•
A few seconds after the last button press, the
setting is saved. The display shows the time of
day.
•
The Auto function symbol (1)
(1)
(1)
(1) shows the activation
of a timer function that stops the oven operation
after the preset time.
