19
WARNING:
Do not modify the appliance plug. If the plug does
not fit properly to the outlet, let install a proper
outlet by an authorized specialist.
The accessibility of the power plug must be en-
sured to disconnect the appliance from the power
supply in case of emergency.
Make sure that the voltage supply matches the
specifications on the rating label before connect-
ing.
Connect the mains cable to a properly installed
and earthed wall outlet.
If the plug after installation is not accessible, a
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.
Reversing the door opening
If required, the door opening can be moved from the
right (supplied condition) to the left side.
WARNING:
When replacing the door stop, the appliance must be
disconnected from the power supply first.
NOTE:
Ask another person to assist.
You possibly need:
screw wrench, Phillips screw-
driver as well as a thin-blade screwdriver.
*Delivery scope!
Keep the parts to be replaced for another possible
door stop change.
Remove the hinge cover and the blanking cap.
Dismount the upper door hinge and lift out the
appliance door.
Transfer the doorstop on the door underside. Set
the appliance door safely aside.
Tilt the unit slightly backwards and lock it in this
position. Unscrew the feet and disassemble the
lower door hinge.
Move and fasten the lower door hinge to the op-
posite appliance side. Screw in the feet accord-
ingly.
Put the appliance back in the upright position. Put
on the appliance door and fix it in the intended
position.
Move and fasten the upper door hinge to the op-
posite appliance side after unscrewing the hinge
pin and inserting it from the other hinge side.
Put on the hinge cover (*delivery scope) and the
blanking cap.