Bomag BW 100 AD-5 Скачать руководство пользователя страница 94

Страница: 94 / 212

5.10 Checking the hydraulic oil filter

WARNING!
Danger of burning on hot compo-

nents!

– Wear your personal protective

equipment (protective gloves,

protective clothing).

– Avoid touching hot components.

Protective equip-

ment:

Working clothes

Safety shoes

Protective gloves

The maintenance indicator is a mechanical

indicator which must be checked at operating

temperature.

Make sure that no persons are in the

danger zone during maintenance work.

Drive the machine onto level, firm ground.

Shift the travel lever to “Middle” position

and engage it in parking brake position.

The machine will decelerate down to a

standstill and the parking brake will be

applied after approx. 2 seconds.
The parking brake warning light lights

up.

B-880-0012

Fig. 61

Checks prior to start up – Checking the hydraulic oil filter

BW 100 AD-5

Содержание BW 100 AD-5





















































































































































































































Результаты поиска

Содержание BW 100 AD-5

Отзывы:

Бренды по названию

Популярные бренды

Bomag BW 100 AD-5, Инструкция по эксплуатации и обслуживанию

Результаты поиска

Содержание BW 100 AD-5

Отзывы:

Бренды по названию

Популярные бренды