SG560K-8mHD
4 Advanced Operations
Page 11
Video Length
It extends from 1 to 60 seconds with a step of
one second.
PIR Sensitivity
This parameter defines the sensitivity of the
PIR. There are three parameters: High, Normal,
Low and Off. The default value is “Normal”. The
higher degree indicates that the camera is more
easily triggered by motion, taking more pictures
or recording more videos. It is recommended to
use high sensitivity degree in a room or
environment with little interference, and to use
low sensitivity for outdoor or environment with
lots of interferences like hot wind, smoke, near
window etc. Furthermore, the sensitivity of the
PIR is strongly related to the temperature.
Higher temperature leads to lower sensitivity.
Therefore it is suggested to set a higher
sensitivity for high temperature environment.
Please note that if the Timer Interval is set to
Off
, then the PIR Sensitivity can’t be set to
Off
.
PIR Interval
This parameter means how long the PIR
sensor will be inactive after each triggering.
During this time the PIR of the device will not
react to the motion of human (or animals). The
minimum interval is 0 second (meaning the PIR
works all the time). The maximum interval is 60
minimums (meaning the PIR will be disabled for
1 hour after each triggering). Please note that
there are a few seconds of internal processing
delay between each triggering, even if 0 second is
set.
Timer Interval
This parameter means the camera can capture
images or videos at a preset time interval
regardless of whether motions are detected. The
default parameter is Off, which means the timer
function is disabled. Changing this parameter to
a non-zero value turns on the Timer Interval
mode, and camera will take photos at given time
interval.
