SG968D/S-10M
4
Advanced
Operations
Page 14
then the Time Lapse can’t be set to
Off
.
PIR Trigger
This parameter defines the sensitivity of the
PIR. There are four parameters: High, Normal,
Low and Off. The default value is “Normal”. The
higher degree indicates that the camera is more
easily triggered by motion, taking more pictures
or recording more videos. It is recommended to
use high sensitivity degree in a room or
environment with little interference, and to use
lower sensitivity for outdoor or environment with
lots of interference like hot wind, smoke, near
window etc. Furthermore, the sensitivity of the
PIR is strongly related to the temperature.
Higher temperature leads to lower sensitivity.
Therefore it is suggested to set a higher
sensitivity for high temperature environment.
Please note that if the time lapse is set to Off,
then the PIR trigger can’t be set to Off.
PIR Interval
This parameter means how long the PIR
sensor will be inactive after each triggering in ON
mode. During this time the PIR of the device will
not react to the motion of human (or animals).
The minimum interval is 0 second (meaning the
PIR works all the time). The maximum interval is
1 hour (meaning the PIR will be disabled for 1