Pocket Camera SG560-8MHD
3 Quick Introductions
Page
7
3.3
Power on and Entering into the ON Mode
Before switching on, please pay attention to the follows:
1.
Avoid temperature and motion disturbances in front of
the camera such as big leaf, curtain, air-conditioner,
air outlet of the chimney and other heat sources to
prevent from false triggering.
2.
The height from ground for placing the camera should
vary with the object size appropriately. In general, one
to two meters are preferred.
Slide the power switch to the ON position to power on
the camera and enter into the ON mode
.
After switching on the camera, the motion indication
LED (red) will blink for about 10s. The 10s is a buffering
time before autonomic capturing photos or videos, e.g. for
closing and locking the bottom cover, fixing the camera on
a tree and walk away.
In TEST mode, it requires to connect the control then to
do further customizing settings, when the user complete the
settings, it requires to unplug the control to enter into
normal use, that is, if the wired control still be connected
with the camera, the camera will not work. The camera (the
control must be unplugged when in ON mode) will take
pictures or videos automatically according to the default
settings or preset customer settings.
3.4
Enter into the TEST Mode
Connect the wired control, then switch to the ON
position and enter into the TEST mode. There are some
functions in TEST mode: Customer settings, manual
capture and preview. The control is needed in this mode.
