MG582-8M
4 Advanced Operations
disabled for 1 hour after each triggering. The default value is 1 minute.
Press
LEFT
or
RIGHT
to decrease or increase the value by 5s or 1
minute.
The f
ollowing shows how to set triggering interval time to
5
Mi
rease to
5 Minutes
.
be
cancel setting and return to info display.
4.1.11
he sensitivity of the PIR. There are three
para
nutes
provided that the previous value is
1 Minute
.
a)
Press
MENU
to display the setting menu.
b)
Press
UP
or
DOWN
to select
Interval
.
c)
Press
LEFT
or
RIGHT
to decrease or inc
d)
Press
OK
to save the current setting and the option will
un-highlighted.
Press
MENU
to
Set PIR Sensitivity
This parameter defines t
meters: High, Normal, and Low. The default value is “Normal”.
The higher degree indicates that the Camera is more easily to be
triggered by motion, taking more pictures or recording more videos. It
is recommended to use high sensitivity degree in room or environment
with little interference, and to use lower sensitivity for outdoor or
environment with lots of interference like hot wind, smoke, near
window etc. Furthermore, the sensitivity of the PIR is strongly related
to the temperature. Higher temperature leads to lower sensitivity.
Therefore it is suggested to set a higher sensitivity for high temperature
environment. It is recommended to use the “Low” setting for
temperatures below 35 degrees Fahrenheit and the “High” setting for
temperatures exceeding 95 degrees Fahrenheit.
Page 21