background image

BG500 series 

    

1 Product Feature

 

  1

Product Feature

 

 
1.1

 

General Description 

The

 

BG500 series

 

security camera is a mini 

MMS/GPRS alarm system, based on MMS (Multimedia 
Messaging Service), GSM SMS (Short Message Service) 

and GSM voice technologies. When it is activated, it will 
send MMS (pictures) alerts to your mobile phone or e-mail 
address immediately once the monitored region is 
abnormal. Also, it has two way communication functions. 
You can let the MMS/GPRS alarm system send pictures to 
you any time. 

The BG500 series can monitor your home, office, shop, 

store, warehouse or factory by your mobile phone from 
everywhere and any time. 

The MMS/GPRS alarm system BG500 series security 

camera can be programmed by PC programmer tool 
through TF card, USB cables or SMS command. This is a 
worldwide new solution. 

 

1.2

 

Camera Overview 

The camera has a LCD display for easy setup and has the 

following I/O interfaces: Power/USB connector, Micro SD 
card slot, and SIM card slot. 

Take a few moments to familiarize with the camera 

controls and displays. It is helpful to bookmark this section 
and refer to it when you read through the rest of the 
manual. 

Содержание BG500 series





























Отзывы: