Single Earbud Mode
1. Take out one earbud from the charging case, and make sure the other one is
placed in the charging case and the lid is covered.
2. It will try to pair with the last paired device first then enter pairing mode with
the LED indicators flashing quickly in white.
3. Turn on the Bluetooth function on your device and search for nearby devices.
Find “Boltune BT-BH024” (for the right earbud) or “Boltune BT-BH024 L” (for
the left earbud) in the searching results, tap on the name to connect.
Note:
If you want to change to couple mode, simply take out the other
earbud from the charging case, they will pair with each other
automatically.
If you failed to pair your device with the earbuds, please clear the pairing history
as instructed below:
1. Uncover the lid.
2. Press and hold the Reset Button on the back of the charging case for 10
seconds until the LED indicators flash white three times.
3. If you have paired your device with the earbuds before, remove
"Boltune BT-BH024" and "Boltune BT-BH024 L" from the Bluetooth device list
and pair again.
4. Re-pair with your Bluetooth® device as instructed in “Pairing” section.
Clear Pairing List
Note:
If you want to pair the earbuds with another device when you
have already paired them with a device, deactivate the Bluetooth
function on the paired device or clear "Boltune BT-BH024" and "
Boltune BT-BH024 L" from its Bluetooth list. Restore the earbuds
to factory settings as instructed above if pairing failed.
Operation and Functions
Function
Play / Pause
Volume -
Next Track
Previous Track
Answer Phone
Call
Hang Up Phone
Call
Operation
Put on / take off
the earbuds
Tap and hold the Touch Control
on the right earbud for more
than 3 seconds
Tap and hold the Touch Control
on the left earbud for more
than 3 seconds
Tap the Touch Control on the
right earbud twice
Tap the Touch Control on the
left earbud twice
• Tap the Touch Control on either
of the earbuds once
• Put on either of the earbuds
Tap the Touch Control on either
of the earbuds twice
Voice Prompt
/
Toots when
highest setting
is reached
/
/
/
/
/
Function
Decline an
Incoming Call
Turn On / Off
Voice Control
Clear Pairing List
Go into Pairing
Mode
Successfully
paired with your
device
Bluetooth out of
Range / Failed to
pairwith your
device
Operation
Tap and hold the Touch Control on
either of the earbuds for 2 seconds
Tap and hold the Touch Control on
either of the earbuds for 2 seconds
until a beep is heard
Refer to the “Clear Pairing
List” section
Refer to the “Pairing” section
/
/
Voice Prompt
Call rejected
Toot
/
Pairing
Connected
Disconnected
Note:
The Multifunction Touch Control is available only when you are
wearing the earbuds.
Cleaning and Maintenance
1. Clean the earbuds and the charging case on a regular basis.
2. Use dry and soft cotton cloth to wipe the unit.
3. Keep away from sharp objects to avoid scratches.
4. Put the unit in a dry and shady place if it is to be idle for a long time.
5. Do not clean the product with detergent or chemicals.
Note:
Do not insert anything into the product.
Troubleshooting
No.
Problem
Solution
Failed to turn on the
earbuds
Earbuds low battery, please charge them
1
Failed to charge the
earbuds
• Place the earbuds into the charging
case properly
• Make sure the charging case is
fully charged
2
Can’t charge the
charging case
Make sure the charging cable is intact
and plugged in properly
3
Can’t find
“Boltune BT-BH024”
in the Bluetooth
device list
The earbuds reconnected with previously
paired device automatically:
• Deactivate the Bluetooth function of
previously paired device or clear
“Boltune BT-BH024” from its Bluetooth
device list, and then search again
• Put the device to be connected and the
earbuds within 10 meters / 33 feet
4
Failed to pair the
earbuds with your
device
• Turn on the device and activate its
Bluetooth function before pairing
• Bring the earbuds into pairing mode
as instructed in the “Pairing” section
5
6
No sound in one of the
earbuds in couple
earbuds mode
Place both earbuds back to the charging
case then take them out, they will pair
with each other automatically. If pairing
failed, restore them back to the factory
settings as instructed in the “Restore to
Factory Settings” section
7
Poor sound quality
• Wear the earbuds properly and keep
them close to each other.
• Place the connected device close to the
earbuds or remove the obstacles
between them
• Clear the debris on the earbuds
8
Unstable connection
• Keep the earbuds and your Bluetooth
device within 10 meters / 33 feet
• The effective distance may shorten with
obstacles in the way
• Turn off other Bluetooth devices to
decrease the interference
9
Can’t hear the other
party during a phone call
Set the volume to higher level
10
The other party can’t
hear your voice during
a phone call
Free the built-in microphone of any
covers
11
Multifunction Touch
control of the earbuds
is unresponsive
Place the two earbuds into the charging
case and cover the lid, disconnect the
Bluetooth connection. Uncover the lid to
turn on the earbuds and pair again.
Warranty and Service
If any problems occur, please contact the Boltune Customer Care Centre in your
country via the contact information listed in this User Guide.
The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Sunvalleytek International Inc. is
under license. Other trademarks and trade names are those of their respective owners.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
-
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can
be used in portable exposure condition without restriction.
www.boltune.net
ASIA PACIFIC
E-mail: [email protected]
JP Importer:
株式会社
SUNVALLEY JAPAN
Address:
〒
104-0032
東京都中央区八丁堀
3
丁目
18-6 PMO
京橋東
9F
EUROPE
E-mail: [email protected]
EU Importer: ZBT International Trading GmbH
Address: Halstenbeker Weg 98C, 25462 Rellingen,
Deutschland
NORTH AMERICA
E-mail: [email protected]
MANUFACTURER
Manufacturer: Shenzhen NearbyExpress Technology
Development Co.,Ltd.
Address: 333 Bulong Road, Shenzhen, China, 518129
BT-BH024_V1.1_EN
12-17-2019
MADE IN CHINA
WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its
electronic accessories should not be disposed of with other household waste at the end of
their working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of waste and
recycle them responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take these items for environmen-
tally safe recycling. Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic accessories should not be
mixed with other commercial wastes for disposal.
