Bolton Tools PBS-9, Руководство пользователя

Страница: 2 / 6

USAGE
This product can be used to cut the low-carton shaped steel, round-steel,
angle-steel, square-steel, strip-steel and sheet metal. It is especially suitable for
building site machining repairing. And it is suitable for punching holes in plate made
or low-carbon steel, copper, aluminum, plastic etc. With different punches and dies,
you can make holes from dia. 3mm to 22mm or the same holes of special shape on
plate from 0.5mm to 4.5mm thickness. This machine adopts welded steel plate
construction. Light weight allows moving it easily. Operation is easy and simple. So
it is especially suitable for the medium or small workshops and home-use.
Main technical specifications (mm):
Model PBS-9
Round steel 22mm
Square Steel 20mm
Flat steel 90x14mm
Angle steel 60x7mm
Plate steel 10mm
T-steel 60x7mm
Max. punching capacity
8.0mm
Throat depth 160mm
Punch mold & die 55x34x18mm
Body packing size 99x40x66cm
Handle packing size 124x3.3x7.4cm
N.W/G.W 99/115kg
Thickness
Material
0.5-1.5 1.5-2.5 2.5-3.5 3.5-5.0
Aluminium 2.5-20 3.0-20 5.0-20 8.0-20
Copper 3.0-30 5.0-20 6.0-20 8.0-20
A3 carbon steel 6.0-30 8.0-18 10-17 ----
NOTE
1. Before using this machine, read this manual carefully at first. Check the
fastening screws of every part and see if they are loose, if loose, please tighten
them.
2. Lubricate the sliding place usually.
3. Before shearing, the work-piece must be fastened in order to avoid harming.
4. Be sure not to put finger under the blade.
5. Keep ones balance, far away from the work-piece, in order to avoid harming.
6. Be care for the handle, in order to avoid harming. The strength of the handle is