Bolton Tools BT1340G/1, Руководство по эксплуатации

Страница: 27 / 55

２６
Misalliance of
chuck with main
spindle.
33.Incorrect position of cam. Adjust cam and lock in
proper position.
Uneasy to cut the
thread
34.Excessive clearance of
lead screw in axial direction.
Adjust the thrust nut of
the lead screw holder.
35.Excessive clearance
between saddle or cross slide
or cross slide and tool post
slide.
Adjust slide gib to
proper position.
36.Worn thread or nut in
cross slide or tool post slide.
Adjust or replace it.
37.Excessive clearance of
handwheel.
Adjust the set bushing of
handwheel.
Tailstock is
uneasy to clamp
with bed stably.
38.Clamp handle lever too
long or too short.
Adjust the adjusting nut
of clamp block.