Bolt VM-260, Руководство пользователя

Страница: 15 / 20

Manual Mode / Slave Mode |
15
Manual Mode
In manual mode the VM-260 is triggered by the camera via the hot-shoe connection.
To select manual mode, press the Mode button so the manual mode indicator is lit.
Slave Mode
The VM-260 has an optical sensor that will trigger the flash when it detects a burst from your master flash.
There are two slave modes to select from:
S1 Mode: When the VM-260 is set to S1 mode, it will fire in sync with every flash from the master.
S2 Mode: When set to S2 mode, the VM-260 will ignore one pre-flash and fire in sync with the second flash.
This is useful when used with a master flash in TTL mode.