14
|
Mounting the VM-110
1. Determine what size adapter ring will fit your camera lens; the
engraving on the ring should match your lens’s filter thread.
2. Align the adapter ring with the thread on the inside of the lens,
and screw it on until secure. Do not overtighten.
3. Press and hold the adapter ring locks while mounting the ring
light onto the adapter. Make sure that the Bolt logo is on the
bottom of the ring light and facing away from the camera.
2. Slide the mounting foot
all the way into your
camera’s hot shoe.
3. Rotate the locking
wheel clockwise until
secure.
To mount the LED ring light on your camera, follow these steps:
2
3
2
3
