The FLASH welding helmet
Welding helmet : FLASH - EN 175 compliant
Use :
Bollé Safety welding helmets are specifically designed for electro welding. Any other operation can be hazardous to the operator.
Upkeep :
How long your safety shield will last will depend on what you use it for, how well you maintain it. Inspect your safety shield often. If the
helmet is cracked or broken it must be replaced.
Cleaning and disinfecting :
Bollé Safety welding helmets may be cleaned with a sponge soaked in soapy water or disinfected with a well-diluted
alcohol solution.
Adjusting the head strap :
Adjust the top part of the head strap to adjust the height. The angle of the shield may be adjusted using the three-
position plate found on the right temple. Use the adjusting button on the back of the head strap to adjust the fit.
Lifespan :
The properties of Bollé Safety welding helmets are not likely to change if stored for an extended period, as long as recommended storage
conditions are observed.
Spare parts:
Please only use original spare parts. Contact your local Bollé Protection dealer.
Shipping :
It is recommended that the original packaging be used.
Warning :
While Bollé Safety products are made using materials known for not causing reactions, they may provoke allergic reactions when they
come into contact with sensitive skin.
Detail of limit of use :
lnspect helmet shell and harness assemble frequently. Immediately, replace any damaged or worn components.
EN 175
Manufacturer
Bollé Safety
Reference standard about equipment for
electric welding
Medium energy
shock resistance
B
European Conformity
Markings for the helmet FLASH:
6
EN