Bolin Technology D20 Series, Руководство пользователя

Страница: 45 / 54

45
Baud Rate: This is the transmission rate of the serial
communication channel.
•
The most common is 9600, meaning the
serial port can transfer a max of 9600 bits
per second.
•
All devices should have the same baud rate
to appropriately communicate with each
other
•
The image below shows the possible Baud
Rate options
•
Data Bits: This setting changes the number
of data bits in each character. (Selection
options: 7 or 8)
o
Most modern equipment uses 8 bits as it matches the size of a byte
o
Older equipment may use other data bits such as 7
•
Parity: An error detection method for serial port transmission by adding extra data bit. (Selection options: None,
Even, Odd)
o
Default is set to None
•
Stop Bits: Stop bits lets the devices to know when the end of a character is. (Selection options: 1 or 2)
o
Commonly used stop bit by most devices is 1
o
Certain rare devices use stop bit of 2
o
Both options are supplied for your convenience
Best practice is to have unified setting across all devices on the whole serial communication channel. Default setting are
the following:
•
Baud Rate: 9600
•
Data Bits: 8
•
Parity: None
•
Stop Bits: 1
Note: Please click the SAVE button to store the setting.
Network Config Tab
Use the Network Config Tab to toggle supported devices between Redundant and Switched modes, and to specify static
IP addresses for a device's Ethernet ports.