Bolide MVR9000SD, Руководство пользователя

Страница: 28 / 34

Description: When the MDVR will use 3G network to report to platform, related network settings in this menu
should be done.
1.Insert the appropriate SIM card according to the communication configuration of the machine, supporting
three: WCDMA (China Unicom) , EVDO (China Telecom) and TD-SCDMA (China Mobile). SIM card slot is
on the front panel, with a key to unlock it and open the protective cover by left, you can see two interfaces
SIMA and SIMB. In regard to the SIM card installation, please refer to the second chapter of this manual 2.2
Figure 2-5, or the reference figure as follows.
: domestic access point and the center number is generally in default, do not change; username and password
in some provinces are not in default, and some do not need to enter which means they can be empty, most of
the time use the settings in default will be ok. In regards to foreign 3G, it would need to be set according to the
access point and the center number provided by operators, in some places abroad it must be entered by a user
name and password for normal dial-up; When your host can not report, please make sure your 3G settings are
correct (most of foreigners use the WCDMA device).
D: All set up needs to be saved.
4. Exit all menus, press the INFO button on the remote control, which is able to see the information of 3G
communications, if the signal is good, it will display dial-up success, then the device can be reported to
gServer platform with the server IP address settings, port settings, device number settings.
5. In regards to details of the three steps of reporting to gServer servers, please refer to Chapter 3.6.
2.Installed SIM card and then plug in the 3G antenna, to ensure that the
system is able to receive good 3G signal.
3.Edit the following information on menu interface of wireless broadband :
A: set the module enable to be open.
B: select the type of communication, if the machine supports WCDMA
type, then select
WCDMA; if supports EVDO type, then select EVDO; Press "ENTER"
key to switch (it is decided by models whether it supports WCDMA /
EVDO /TD-SCDMA, each model only support one type, because the
internal module is unique.)
3G
3G wireless setting.