Bolide BN-NVR/32NX, Руководство пользователя

Страница: 28 / 80

23
4.2.1.4 Alarm
4.2.1.4.2 Motion
Go to “Main Menu” → “Parameter ” → “Alarm” → “Motion” to enter into the interface.

Channel:
Enable or disable Motion function.

Sensitivity:
Support 1-8 level, 8 is the highest level.

Buzzer:
When detecting object moving, buzzer makes alarms (disable, 10 seconds,
20 seconds, 40 seconds and 60 seconds).

Alarm Out:
Connect to the alarm switch of the alarm apparatus.

Show Message:
Messages will be displayed on the screen when moving object is
detected and alarms are made.

Send Email:
When moving object is detected, send Email to the specified Email
address.

Full Screen:
When moving object is detected, messages will be displayed in full
screen.

Latch Time:
When moving object is detected, the alarm time can be set as 10
seconds, 20 seconds, 40 seconds and 60 seconds.

Post Recording:
After the alarm finishes, the duration time of the alarm recording
can be set as 30 seconds, 1 minute, 2 minutes and 5 minutes.

Area
：
Click it to enter into the interface to set the motion detection area to be
monitored intensively.
A single channel is divided into 20
ⅹ
15 configurable grids. The red grids indicate that
the motion detection in the area is enabled, white semitransparent ones indicates that
the motion detection in the area is disabled. After setting is completed, right click the
mouse button to return and click Save to make the parameter setting effective.