the middle OK button to set the shielding area, and adopt the up, down, left and
right direction buttons to move the red box to the position requiring temperature
shielding. Press the middle OK button after selection. The system can provide
three shielding areas in total. Press A button to switch the three shielding areas
for setting of position size. When the shielding area is selected, press S button
to switch the position or size adjustment mode, and C button to delete the
shielding area.
After setting, press C button to quit the monitoring point setting box.
3.3.3
Thermal Image Saving
To save the current thermal image acquired, choose one of the four ways below:
Press OK button to pop out the floating panel menu, select the "Take Photo"
option in the menu, and the system will save the image automatically.
Press
"S"
button, and press this button again to save after the image is frozen.
Press
"S"
button continuously for 3 seconds to save the image automatically.
Press the Shortcut button to save the image by setting the shortcut as the
"Take Photo" option.
3.3.4
Thermal Image Playback
There are two ways to open a file:
1
、
Press OK button to activate the main menu, and select the file in the sub-menu of
the "File Management" menu (Select by up, down, left and right buttons).
2
、
Click the "Preview" option in the floating panel, to open the file for options
(Switch options by left and right keys).
When the image is opened, replace the current image saved by up and
low buttons in the playback control panel.
Press cancel button, to exit the playback status and return to the real-time
12
