5
•
Click Finish in the appeared window:
•
Now the S2000-USB driver has been installed. READY indicator on the S2000-USB
face plate should be lit steady. After driver setup, Ports (COM&LPT) of the Device
Manager will include the ‘USB
<–>
RS-232 (COM x)’ entry where ‘
х
’ is the number
of the virtual COM port:
By clicking Advanced you can call the relevant window and change the number of the
COM port. Let the parameters of the virtual
СОМ
port be rest by default (the
parameters are adjusted by a program using this COM port).
2.3.5
Indicator Operation. The READY indicator shall be lit steady in green. USB or
RS-485 indicator’s lighting means receiving a signal from the relevant line.
