2
http://bolid.ru
Figure 1.
Overall and Mounting Dimensions of S2000-AR8
3 MOUNTING THE MODULE
3.1 Please read this manual through before using the drilling template.
3.2
Mounting onto a Wall
3.2.1 Please make sure that the wall the S2000-AR8 is to be mounted onto is solid, flat,
clean, and dry.
3.2.2 Attach the S2000-AR8 to the wall as per Variant 1 or Variant 2 below.
3.2.3
Variant 1
. Apply the drilling template (page 6) to the wall. Drill three holes (A, B and C
or D at your choice).
3.2.4 Insert wall plugs to the holes and screw provided woodscrews to the two upper holes
so that a distance between a screw head and the wall to be about 7 mm.
3.2.5 Remove the cover from the S2000-AR8 as shown in Figure 2.
3.2.6 Hang the S2000-AR8 base on the two screws. Screw the third screw into the bottom
mounting hole and fasten the S2000-AR8 to the wall.
3.2.7
Variant 2
. Apply the drilling template (page 6) to the wall. Drill three holes (E, F and C
or D at your choice)
.
3.2.8 Insert the wall plugs to the holes.
3.2.9 Remove the cover from the module as shown in Figure 2.
3.2.10 Apply the S2000-AR8 base to the wall so that the mounting holes align with the wall
plugs.
3.2.11 Screw the woodscrews into the mounting holes and secure the S2000-AR8 to the wall.
3.3
Mounting onto a DIN Rail
3.3.1 Mount the S2000-AR8 on the DIN rail as shown in Figure 3.
3.3.2 Remove the S2000-AR8 cover as shown in Figure 2.
