7
8.2
The reader is serviced according to a scheduled-preventive system which provides annual
maintenance. The maintenance shall include the following:
–
Checking the exterior conditions of the reader;
–
Testing functionality of the reader according to Section 7 of this Manual;
–
Inspection for secure mounting of the reader and good conditions of wires and terminal
tightening.
WARNING!
The manufacturer does not accept any claims without an incident/malfunction report.
8.3
A reader’s failure being a result of consumer’s not observing mounting or operation
rules is not a reason for claims and warranty repair.
WARNING!
Do not try to remove the reader’s PCB, this automatically annuls the warranty.
8.4
Claims shall be submitted to the following address:
NVP BOLID CJSC, #4 Pionerskaya Str., Korolyov, Moscow Region, Russia, 141070
.
Tel./fax: +7 (495) 775-71-55 (PBX). E-mail:
.
8.5
In case of any issue related to use of the product, please contact with the technical support:
+7 (495) 775-71-55 or e-mail:
.
9
TROUBLESHOOTING
9.1
The list of possible failures and the ways to repair them is shown in Table 9.1.
Table 9.1 Possible Failures and Repair
Failure
Cause
Solution
The LEDs on each side of the reader doesn’t
illuminate
Input power is not
applied
Check input power
voltage on the relevant
inputs of the reader
After presenting a credential the reader beeps but the
device the reader is connected to doesn’t respond on
presenting the credential and the reader indicates
nothing.
Poor contact in the lines
D0, D1 or the device is
improperly adjusted
Check the contact, check
settings of the device and
the reader
10
TRANSPORTATION, STORAGE, RECYCLING
10.1
The readers packed for transportation can be stored in unheated warehouses at
ambient temperature from minus 50
°
С
to + 50
°
С
and relative humidity up to 95% at +35
°
С
.
10.2
The readers in consumer packaging shall be stored in heated warehouses at ambient
temperature from +5
°
С
to +40
°
С
and relative humidity up to 80% at +20
°
С
.
10.3
The reader is to be recycled taking into account that there are no toxic components in
it.
10.4
Precious material content: not subject to inventory accounting in case of storage, disposal
and recycling (Clause 1.2 of Russian Standard GOST 2.608-78).
11
MANUFACTURER WARRANTY
11.1
The manufacturer guarantees that the product meets technical requirements specified in
the manuals if the user follows the instructions for shipment, storage, installation, and usage.
11.2
Warranty period is 18 months but no more than 24 months from the manufacturer's date
of issue.
12
CERTIFICATES
12.1
Proxy–3A, Proxy–3M, Proxy–3MA Proximity Card Readers meet the requirements of
Technical Regulations of Custom Union TR CU 020/2011. This is approved by Conformity Certificate
№
RU
С
-RU.
МЕ
61.
В
.01610.
12.2
Production of proximity card readers Proxy–3A, Proxy–3M, Proxy-3MA is certified
according to GOST ISO 9001-2011 by a conformity certificate No.
РОСС
RU.
ИК
32.
К
00153.
Содержание Proxy-3A
Страница 1: ...PROXIMITY CARD READERS Proxy 3A Proxy 3M Proxy 3MA User s Manual ...
Страница 7: ...8 Appendix A View and Overall Dimensions ...
Страница 9: ...10 Appendix B continued ...
