BOLERO AGUAZERO 6600, Инструкция по эксплуатации

Страница: 62 / 244

62
ENGLISH
Step 4: Electric connection
Connect the dishwasher to the electric circuit.
WARNING: make sure that the mains voltage matches the voltage stated on the rating
label of the appliance and that the wall outlet is grounded.
The dishwasher plug must be connected to a grounded socket. If you do not have
a grounded socket, a grounded installation must be carried out by a licensed electrician. In
case of ungrounded use, Cecotec shall not be liable for any malfunction or damage that this
may cause.
Make sure there is an appropriate grounded socket before using the appliance.
Step 5: Placing the dishwasher
Fig. 2
1.
If you want to install the dishwasher in an existing cabinet, you must make sure there is
enough space to do so and that the wiring and plumbing are appropriate.
WARNING: the worktop under which you want to install the dishwasher must be stable
in order to avoid imbalances.
2.
Level the dishwasher feet according to the floor slope.
3.
Fit the machine by pushing it under the worktop, taking care not to crush or bend the
hoses.
Make sure the water supply and water outlet hoses are not crushed or trapped.
Make sure the dishwasher is not placed over the electric cable when installing it.
WARNING: after removing the top panel of the dishwasher, the machine must be placed
in a space with the dimensions shown in the following table:
With the top panel Without the top panel
Height (H) (mm) 850 mm 835 mm
4. BEFORE USING THE DISHWASHER
For a correct washing, the dishwasher needs soft water. Otherwise, water will leave scale
remains in the tableware and in the interior of the machine which may block the dishwasher.
To do this, water goes through a system that removes the ions that form the hardness of the
water, either special dishwasher salt or a water softener.
4.1 Dishwasher salt
Use only salt special for dishwashers.