XU-5 Open Frame Board Holder with X-Y micrometer
Bokar International www.bokar.com www.bomir.com
Page 2
XU-5 Open Frame Board Holder with
X-Y micrometer positioning of PCB for fine adjustment
TABLE OF CONTENTS
PAGE
I. INTRODUCTION
2
II. SAFETY
3
III. PACKAGING
4
IV. UNPACKING
4
V. SET-UP AND INSTALLATION
4
VI. SYSTEM DESCRIPTION and APPLICATION
6
VII. RECOMMENDED EQUIPMENT
6
I. INTRODUCTION
•
Attaches to all X-KAR Bases or can be used as a free standing X-Y precision positioning
stage
•
Open Frame construction for use with under board pre-heaters
•
Stainless steel base
•
Quick approximate alignment in both axis with convenient half-turn blocking mechanism
•
Fine X, Y adjustment (up to ½” or 10mm) with precision micrometers
•
Horizontal undercut to secure top of the PCB always on the same level
•
Spring loaded holding mechanism on one side of the board holder for easy replacement of
boards
FIG. 1 VIEW OF THE SYSTEM