Operating Instructions Bohle Edge coating deleter
–
Version 2 E
4
1. General safety instructions
•
This Edge coating deleter may only be set up, operated and maintained by authorised, trained and qualified personnel who
are familiar with these instructions. The personnel must be made aware of any residual hazards.
•
Bohle guarantees trouble-free operation only with original spare parts and accessories.
•
Before use, ensure that all guards are appropriately positioned and undamaged.
•
To avoid a malfunction, the operator must operate the Edge coating deleter in accordance with these operating instruc-
tions and applicable regulations.
•
In addition to the operating instructions, the generally applicable legal and other binding regulations on accident preven-
tion and environmental protection must be observed.
•
Always wear appropriate protective equipment when handling glass.
•
Do not make any changes, additions or conversions to the Edge coating deleter device. This applies in particular to safety
devices. Unauthorised modifications and alterations to the Edge coating deleter will invalidate the EC declaration of con-
formity issued.
•
The operating instructions must be kept with the unit.
•
Regularly check the grinding wheel, protective guard and cable for damage. Replace damaged parts immediately!
•
The use of the Edge coating deleter in a potentially explosive (ATEX) area is prohibited.
•
During operation, never reach into the working area of the Edge coating deleter by hand or with tools; do not bypass pro-
tective devices. There is a risk of injury!
•
The operator must ensure that no unauthorised persons are in the working area during operation. There is a risk of injury!
•
Device only to be used in flawless condition. There is a risk of injury!
•
It is forbidden to operate the Edge coating deleter under the influence of medication that affects the ability to perceive or
react and under the influence of drugs and alcohol!
•
If safety devices are removed during repair work, the Edge coating deleter must not be put back into operation until all
safety devices have been fitted and checked for function.
•
Any maintenance work must be done in "OFF" position only. Secure the edge coating deleter against unintentional
switching-on before beginning maintenance work.
•
Because of dust formation, masks must be worn when using this tool. The operating company is expected to provide a
suitable grinding dust extraction which has to be connected to the suction piece of the protection cover.
