•
1
00-,
1
50-, and 250-watt models, each with a large
power reserve
• Capable of handling 70V, 25V, 8-ohm, and 4-ohm
speaker loads
• 8 module bays
• Wide selection of advanced plug-in modules
• 2 module bays capable of handling signal processing
plug-in output modules
• 4 levels of priority between modules
•
11
-segment LED output level meter monitors the
output level of the power amplifier with Peak and
Average meter switch
• Adjustable output level limiter with limit indicator
• Tape output available on front of unit
• Optional front-mounted input combo jack with
1
/4" stereo phone and female XLR capabilities
• Motorized master volume control can be remotely
operated
• Bass and treble controls with center detent
• Two-color LED for each channel indicates input
active/clipping
• Switch permits user to select either transformer-
coupled outputs or a direct low-impedance output
• Bass and treble control bypass switch (located in
module bay 6)
•
1
25 Hz Lo-cut feature (switch located in module
bay 6)
• 5-position barrier strip, with clamping washers, pro-
vides connections for speaker loads
• Master mute function overrides all audio from the
mixer section of the amplifier
• Screw terminal for master mute and remote volume
control functions
• Each of the 8 module bays has an associated inde-
pendent volume control
• Remote volume control panel (RVCP) (sold sepa-
rately)
• Requires flush-mount (Model BBF) or surface-
mount (Model BBS) back boxes (sold separately)
• Requires front cover door (WMAD sold separately)
• UL and CSA Listed
Features
Description
Specifications subject to change without notice.
© 2002 Bogen Communications, Inc.
Part No. 54-80
1
5-0
1
RA Printed in U.S.A. 02
1
2
Wall-Mount
Power Vector
Modular Amplifiers
Models WV
1
00,W V
1
50,
and WV250
Bogen's Wall-Mount Power Vector modular amplifiers offer a wide range of power from which to choose from,
with three models ranging from
1
00W to 250W. The amplifiers are designed to work with both high- (70/25V)
and low- (4/8-ohm) impedance speaker systems.
Each model includes eight module bays for plug-in input modules and allows for up to four levels of priority
between modules. Two module bays are capable of accepting signal processing plug-in output modules. Each
module is controlled by an independent volume control with an associated signal/clip LED for signal status.An
11
-segment LED output meter monitors output signal level.
Each model includes a motorized master volume control that can be controlled using a remote volume control
panel (RVCP, sold separately).
