INSTRUCTION MANUAL
MODEL TP160
AM/FM TUNER
OPERATING INSTRUCTIONS
POWER
Depress POWER ON button to turn on tuner. Turn off
tuner by depressing button again to release it to the out
position.
AM
RECEPTION
Depress AM button. Turn TUNING knob until pointer
indicates desired station on AM (bottom) dial. Adjust TUN-
ING knob until needle on tuning meter shows maximum
deflection to right.
FM RECEPTION
Depress FM and FM MUTE buttons. Turn TUNING
knob until pointer indicates desired station on FM (top)
dial. Carefully adjust TUNING knob until needle on tuning
meter is at the center of the tuning dial, exactly on the
circle above the letters “FM”.
NOTE
Muting removes the annoying noise between FM
stations. The muting circuitry may prevent the
receiver from distinguishing a very weak signal
from interstation noise. To tune in very weak
stations, defeat the mute circuit by releasing
the FM MUTE switch to the out position.
SPECIFICATIONS
FM TUNER SECTION
TUNING RANGE: 87.5
MHz to 108.5 MHz @ 3 0 0
QUIETING SENSITIVITY:
1 . 5 µ V for 30 db @
0.5µV for 20 db @
HARMONIC DISTORTION: 0.3%
at 100% modulation.
FREQUENCY RESPONSE: 20-20,000
Hz fldb (after de-emphasis).
AM TUNER SECTION
TUNING RANGE: 530
kHz to 1620 kHz.
LOOP SENSITIVITY: 2µV @
6db S/N and 60% modulation.
ALTERNATE CHANNEL SELECTIVITY:
(±l0 kHz) 40 db.
HARMONIC DISTORTION:
Less than 1% @ SO% modulation
HUM AND NOISE LEVEL: 70
db below 100% modulation.
MISCELLANEOUS
ALTERNATE CHANNEL SELECTIVITY: 60
db. LHFM
DETECTOR BANDWIDTH: 900
kHz.
CAPTURE RATIO:
1.9 db.
IMAGE REJECTION: 60
db.
I.F. REJECTION: 85
db.
CROSS MODULATION REJECTION: 80
db.
ANTENNA:
balanced;
unbalanced or built-in line.
AUDIO OUTPUT:
Adjustable (rear panel), 0-1.2V
OPERATING CONTROLS:
Selector (Power, AM, FM, FM
Mute), Tuning.
POWER CONSUMPTION: 60W @ 120
vac, 6OHz
OVERALL DIMENSIONS: 14-l/2”
W x
3-3/4”
H x 12” D
RACK INTERIOR DIMENSIONS:
14” W x 3-l/4” H x 11” D
WEIGHT:
9-l/2 Ibs.
PRlNTED IN U.S.A.
10-70A
LEAR SIEGLER, INC.
BOGEN DlVlSION
PARAMUS, N. J. 07652
54-5516-01
