Audio Connections
Two audio patch cords are provided to make audio
connections. One cord is a stereo patch cord (2
RCA plugs at each end) and one is a stereo-to-mono
cord (2 connectors at one end, 1 connector at the
other end).
1. Connect the two plugs from one end of either cord
to the
R
and
L OUTPUT
terminals on the TP-30D.
2. Connect the other end of the cable to the high-
level input (AUX, HI-Z TUNER) of an audio pre-
amplifier.
Operation
Power
Press the front panel
POWER
switch to apply power.
Adjust the volume to the appropriate level using the
amplifier volume controls.
To Select a Band
Press the button marked
BAND
. The current band
appears on the display: FM1, FM2, FM3, AM1 or
AM2.
You can preset up to six stations on each band for a
total of 30 preset stations (18 FM and 12 AM).
To Tune a Station
Press the
UP
or
DOWN
buttons.
5020-01.qxd 3/9/01 9:20 AM Page 5
