Bogen's Power Vector modular input amplifier series consists of five models, ranging from 35 to 250 watts of
power. Each model accepts up to 8 plug-in modules with 4 levels of priority between modules. Two module bays
also accept signal-processing output modules.
Each input has its own independent volume control and a signal/clip indicator. An 11-segment LED meter indicates
output level, while a motorized master volume control allows smooth and accurate operation of the unit's master
volume control from a remote control panel
(sold separately)
.
Five amplifier models
offer minimum power
handling capacity of 35,
60, 100, 150, and 250 watts
and each has a
substantial power reserve.
(Typical reserve power@ 1kHz)
FEATURES LIST:
•
5 models ranging from 35W to 250W, with
a large power reserve
•
Capable of handling 70V, 25V, 8-ohm,
and 4-ohm speaker loads
•
8 module bays
•
Wide selection of advanced plug-in modules
(see pages 3 & 4)
•
2 module bays capable of handling signal
processing output modules
•
4 levels of priority between modules
•
11-segment LED output level meter monitors the
output level of the power amplifier, with Peak
and Average meter switch
•
Motorized master volume control that can
be remotely operated
•
Two-color LED for each input channel indicates input
signal and clipping
•
Master Mute function overrides all audio from the
mixer section of the amplifier
•
Lockable switch permits user to select either
transformer-coupled outputs or a direct
low-impedance output
•
Bass and treble controls with bypass switch
•
3 priority mute buses are available externally
for system expansion and external control
•
Bridging connection available for expanding number
of Power Vectors in a system
•
125 Hz Lo-cut switch
•
Signal processing insert jacks allow external
equipment to be inserted between the pre-amp
output and the power amp input
•
Pre-EQ, unbalanced, buffered output signal “post”
all unit controls, but “pre” any external signal
processing equipment inserted
•
Grounded convenience receptacle
•
8 Module Security Covers
(PVMC)
included
(not on Wall Mount units) (see below)
•
Front panel security cover
(PVSC)
with break-away
access tabs available
(see below)
•
2 rack spaces high
(3-1/2")
•
UL/cUL listed
Power Vector Amplifier
Product Features
Performance Specifications
Power Handling
Power Vector Amplifiers, Power Vector Amplifiers, Power Vector
Rack-Mount
(V-Series)
Wall-Mount
(WV-Series)
Mixer
MODELS:
(Model Number:
Power Output Rating**)
Frequency Response
Transformer:
45 Hz - 20 kHz; 0/-2 dB
45 Hz - 20 kHz; 0/-2 dB
+/- 1 dB
(20 Hz to 20 kHz)
Direct:
20 Hz - 20 kHz; 0/-1 dB
20 Hz - 20 kHz; 0/-1 dB
----------
Distortion
Transformer:
0.5%**
0.5%**
0.01%†
Direct:
0.1%**
(.05% typical @ 1 kHz)
0.1%**
-----------
Signal-to-Noise†
Fundamental:
-94 dB
-94 dB
-99 dB
With AUX Module:
-70 dB
-70 dB
-94 dB
With MIC Module:
-60 dB
-60 dB
-64 dB
With TEL Module:
-70 dB
-70 dB
-92 dB
Tone Controls
Bass Frequency:
100 Hz
(+/- 10 dB minimum)
100 Hz
(+/- 10 dB minimum)
100 Hz
(+/- 10 dB minimum)
Treble Frequency:
10 kHz
(+/- 10 dB minimum)
10 kHz
(+/- 10 dB minimum)
10 kHz
(+/- 10 dB minimum)
Low Cut Frequency:
125 Hz
(@ -6 dB/octave)
125 Hz
(@ -6 dB/octave)
125 Hz
(@ -6 dB/octave)
Sensitivity
0.4V (at module bay connector)
0.4V (at backplane connector)
0.4V (at backplane connector)
Output Regulation
2 dB or better, no load to full load
2 dB or better, no load to full load
---------
Output Impedance
Transformer-Coupled:
70V, 25V, 8 ohms (bal or unbal)
70V, 25V, 8 ohms (bal or unbal)
---------
Direct Coupled:
4 ohms
4 ohms
---------
Balanced:
---------
---------
50 ohms @ -4 dBu, 600 ohms
@ -10 dBu, 5 ohms @ -50 dBu
Unbalanced:
---------
---------
100 ohms
Output Level
Balanced:
---------
---------
Sele4, -10, -50 dBu
(typical when meter reads "0");
+18 dBu max.
Unbalanced
:
---------
---------
0 dBu (typical when meter
reads "0"); + 20 dBu max.
Inserts
Insert "OUT" Level:
1 VRMS (@ FRP)
---------
---------
Insert "OUT" Impedance:
50 ohms maximum
---------
---------
Insert "IN" Sensitivity:
1 VRMS
---------
---------
Insert "IN" Impedance:
10k ohms minimum
---------
---------
Pre-EQ Output
(on V Series);
Tape Out
(on WV Series)
Output Level:
4 VRMS (@ FRP)
4 VRMS (@ FRP)
---------
Output Impedance:
50 ohms maximum
50 ohms maximum
---------
Signal/Clip Indicator
Signal Detect Threshold:
10 mV @ output of module
10 mV @ output of module
10 mV @ output of module
Signal Indicator Hold Time:
50 mS green indicator
50 mS green indicator
50 mS green indicator
Clip Detect Threshold:
6V @ output of module
6V @ output of module
6V @ output of module
Clip Detect Hold Time:
50 mS red indicator
50 mS red indicator
50 mS red indicator
AC Power Receptacle
500W max. power, unswitched
----------
500W max. power, unswitched
AC Voltage
120V AC, 60 Hz
120V AC, 60 Hz
120V AC, 60 Hz
AC Current
V250: 5.5A; V150: 3.5A; V100: 2.0A;
WV250: 5.5A; WV150: 3.5A;
0.2A
V60: 1.3A; V35: 0.6A
WV100: 2.0A
Product Weight
V250: 40 lb.; V150: 35 lb.; V100: 32 lb.;
WV250: 28 lb.; WV150: 29 lb.;
18 lb.
V60: 28 lb.; V35: 24 lb.
WV100: 27 lb.
Dimensions
17-1/4" W x 3-7/8" H x 14-3/4" D
17-1/4" W x 3-7/8" H x 14-3/4" D
(all models)
V250: (250W / 340W*)
WV250: (250W / 340W*)
VMIX
V150: (150W / 200W*)
WV150: (150W / 200W*)
V100: (100W / 140W*)
WV100: (100W / 140W*)
V60: (60W / 85W*)
V35: (35W / 45W*)
* Typical, @ 1 kHz/0.1% THD/4 ohms
** THD+N, Maximum, full bandwidth @ FRP
† Referenced to FRP output level, 20 Hz - 20 kHz bandwidth limited
WV100/150/250: 14-1/8" W x 21" H
BBF: 14-1/2" W x 24- 3/4" H x 3-7/8” D
BBS: 16-1/4" W x 26- 3/4" H x 3-7/8” D
WMAD: 16-1/4" W x 26- 3/4" H x 1” D
2
7
Accessories for Power Vector Amplifier Models
RVCP
Remote Volume
Control Panel
PVSC
Power Vector Security Cover
RPK87
Rack
Mounting Kit
PVMC
Module
Security Cover
Wall Mount versions and Mixer only version
(VMIX)
also available.
(see page 6)
