Bogen Nyquist NQ-S1810CT-G2, Руководство по настройке

Страница: 12 / 23

10
The following table describes the Configuration Settings tab settings:
The Configuration Settings tab also displays the following information for each Device
Station attached to the amplifier:
Table 5. Configuration Settings (Standalone disabled)
Get Configuration from
Server Retrieves configuration settings (i.e., web username,
server, and local port) from the TFTP server specified in
the Network Settings (see "Network Settings Tab
Parameters” on page 6 ).
Web Username Identifies the username of the current user.
Emergency-All-Call Identifies the IP address, port number, cut level (vol -
ume), and station list used for emergency all-call
pages.
All-Call Identifies the IP address, port number, cut level (vol -
ume), and station list used for all-call pages.
Audio Distribution Identifies the IP address, port number, cut level (vol -
ume), and station list used for audio distribution.
Multicast # Identifies the IP address, port number, cut level (vol -
ume), and station list used for the multicast audio
stream of one (or more) zones.
Port Number Identifies the port number of the appliance.
Port Type Identifies the device type to which the port connects.
Account ID Identifies the SIP account (IP address) associated with
the device preceded by the extension of the device
associated with this port.
Local Port Identifies the port used for SIP.
Username Identifies the username or extension for the station
associated with the port.