Bogen’s VOIP gateways (Models MVP
1
30BG,
MVP2
1
0BG, MVP4
1
0BG, and MVP8
1
0BG) are
1
, 2, 4,
and 8 analog port voice over IP gateways that shall
allow paging communication to be sent over an exist-
ing IP network or the Internet.
All models shall include FXS/FXO for direct connec-
tion to Bogen’s telephone paging interfaces.
All models shall utilize the H.323 or SIP protocols to
provide complete interoperability with other Internet
telephony solutions and shall support SPP protocol
for the use of dynamic IP addresses.
All models shall incorporate PSTN fail-over to auto-
matically route calls over the PSTN network if the IP
network is disabled and shall provide call transfer, call
forwarding, call hold, call waiting, and name identification.
Configuration and management shall be possible using
a Web browser or Microsoft Windows
®
.
All models shall have a two-year warranty.
The MVP
1
30BG shall measure 4-3/8" W x
1
" H x 5-
5/8" D and weigh less than
1
lb.The MVP2
1
0BG shall
measure 6-
1
/4" W x
1
-
1
/2" H x 9" D and weigh 2 lb.
The MVP4
1
0BG and MVP8
1
0BG shall measure
1
7-
1
/2" W x 3-7/8" H x 8" D and weigh 8 lb.
(For Use with Multi-port Models):
The VOIP Gateway shall provide contact closure
Receive & Transmit in E&M mode.
Architect and
Engineer
Specifications*
50 Spring Street, Ramsey, NJ 07446, U.S.A.
20
1
-934-8500 FAX: 20
1
-934-9832
Web Site: www.bogen.com
Technical
Specifications
Number of Ports:
1
, 2, 4 or 8
Port Interface:
FXO, FXS & E&M support on
each port (MVP
1
30BG supports
FXS and FXO only)
FXS Interface:
KTS, telephone set, or fax;
ground and loop start
FXO Interface:
PBX station; CO line, loop start,
2-wire
E&M Interface:
PBX E&M trunk; 2- or 4-wire
E&M Signal Types:
I through V
Dialing:
DTMF or pulse
Connectors:
1
RJ-48 (E&M);
1
RJ-
11
(programmable FXS or FXO)
per port
LAN Port
Format:
Ethernet/Ethernet II or SNAP
Interface:
1
0/
1
00BaseT
Command Port
1
- & 2-Port Interface:
RS-232C/D; RJ-45
(RJ-45 to DB9 cable included)
4- & 8-Port Interface:
RS-232C/D; DB25
(DB9 to DB25 cable included)
Speed & Format:
11
5.2K bps asynchronous
Protocols:
H.323 V4, SIP, H.450.2, H.450.4,
H.450.6 & H.450.8, RTP, RTCP,
SMTP, Q.93
1
,T.38 &
Group 3 fax relay, DTMF
out-of-band (RFC 2833)
Bandwidth Management:
G.7
11
, G.723, G.726, G.727,
G.729, & proprietary voice
compression, silence
suppression,VAD, CNG
Voice Quality:
DiffServ, G.
1
65, G.
1
68, adaptive
echo cancellation, forward error
correction, bad frame
interpolation, tunable latency,
dynamic jitter buffers
Management:
Web browser,Windows
®
,
SNMP agent
Power
Voltage & Frequency:
11
5V/240V AC, 47/60 Hz
Power Consumption:
1
-Port - 4.5 W, 2-Port -
1
9 W;
4- & 8-Port - 46 W
Dimensions (W x H x D)
MVP
1
30BG:
4-3/8" x
1
" x 5-5/8"
MVP2
1
0BG:
6-
1
/4" x
1
-
1
/2" x 9"
MVP4
1
0BG/MVP8
1
0BG:
1
7-
1
/2" x 3-7/8" x 8"
Product Weight
MVP
1
30BG:
less than
1
lb.
MVP2
1
0BG:
2 lb.
MVP4
1
0BG/MVP8
1
0BG:
8 lb.
Certification
EMC:
FCC Part
1
5 Class A,
EN55022, EN55024,
EN6
1
000-3-2, EN6
1
000-3-3
Safety:
CE, UL 60950, EN60950, cUL,
ACA TS-00
1
Telecom:
FCC Part 68, CS-03,TBR2
1
* Architect and Engineer Specifications are available online in a
Microsoft® Word document to assist you with preparing your bids.