background image

Power Rating (RMS):

GS35

- 35 watts;

GS60

- 60 watts;

GS

1

00

1

00 watts;

GS

1

50

1

50 watts

Frequency Response:

Transformer Output —

65 Hz to 20 kHz, +0/-2 dB @ -2 dB

Direct Output —

20 Hz to 20 kHz, +0/-

dB @ rated power

Distortion:

Transformer Output —

0.5% (max.), 0.3% (typ.), 65 Hz to 20 kHz @ -2 dB

Direct Output —

0.5% (max.), 0.3% (typ.), 20 Hz to 20 kHz

Signal-to-Noise Ratio:

Fundamental: -94 dB or better; Aux 

1

& 2: -70 dB; Tel: -70 dB or better @ 600 ohms

Mic

1

- 6: -60 dB or better @ 200 ohms

Inputs/Outputs:

Mic - 

6 Lo-Z balanced via 4 XLR connectors and 2 screw terminals 

Sensitivity: 0.35 mV (200 ohms)

Aux - 

2 Hi-Z RCA jacks. Sensitivity: 0.085V (

1

0k ohms)

Telephone - S

crew terminals. Sensitivity: 0.07V (600 ohms)

Output to Power Amp -

5V @ Rated Output via RCA jack

WMT

1

A Output -

25V @ Rated Output via RCA jack

Tape Output - 

687 mV @ Rated Output via RCA jack

Output Impedance:

All models: balanced or unbalanced 8-ohms, 25V, 25VCT, 70V, 4-ohm direct

Output Regulation:

Better than 2 dB from no load to full load

Variable Mute Range

:

0 dB to -30 dB (Aux 

1

& 2)

ALC

:

Distortion - less than 0.5%; Compression - 25 dB

VOX Threshold:

Input 20 mV (VOX control max. CW position)

Mic Precedence:

Via terminal strip. -60 dB: Mic 

1

, 2, 3, 5/Tel, 6/Aux,Aux 2

Power In/Pre Out:

In 

1

V/Out

1

V via RCA jacks

Loudness Contour:

+8 dB @ 

1

00 Hz, +4 dB @

1

0 kHz (Aux 

1

& 2 control at 

1

/4 CW position)

Aphex Aural Exciter:

Type A9

Overload Protection:

Electronic with automatic reset

Thermal Protection:

1

05°C (220°F) thermistor attached to heat sink

Line Fusing:

Resettable circuit breaker

Dimensions:

1

6-

1

/

2

" W x 3-

1

/

2

" H x 

1

2" D All Models

Shipping Weight:

GS3

5 - 

1

9 lb.;

GS60 -

24 lb.;

GS

1

00

- 28 lb.;

GS

1

50

- 3

1

lb.

Technical

Specifications

Architect

& Engineer

Specifications

The amplifier shall be a model _____, rated at ____ watts
RMS (insert GS35/35 watts, GS60/60 watts, GS

1

00/

1

00

watts or GS

1

50/

1

50 watts).

The amplifier shall accommodate up to 6 Lo-Z balanced
microphones, 2 Hi-Z auxiliary sources and a telephone pag-
ing input (Mic 5 shall be switch-selected for mic or tele-
phone line; Mic 6 switch-selected for microphone or Aux 

1

).

Mics 

1

through 4 shall use XLR-type connectors; Aux input

shall be via RCA phono jacks and all other connectors shall
use screw terminals. Phantom power shall be supplied for
use with condenser microphones. Microphone precedence
connections shall be included for Mic 

1

, 2, 3, 5/Tel, 6/Aux 

1

and Aux 2.
The amplifier shall provide a frequency response from 20 Hz
to 20 kHz +0/-

dB at rated power. Distortion shall be 0.3%

typically, from 20 Hz to 20 kHz direct at rated power, and
from 65 Hz to 20 kHz transformer @ -2 dB.
The amplifier shall include an Aphex Aural Exciter circuit,
variable loudness contour control, and dual function equaliz-
er. The equalizer shall be switch selectable for feedback con-

trol or acoustic shaping and shall include 

1

0 center-detent

slide controls providing ±

1

2 dB of boost or cut from 62.5

Hz to 

1

6 kHz in acoustic mode and from 

1

25 Hz to 8 kHz

in feedback control mode.
The amplifier shall include automatic level control to provide
consistent output regardless of who is paging, automatic
muting complete with a VOX circuit, and a variable mute
level. Provisions shall also be included for remote volume
control, using an accessory control unit (GSRVC).
Outputs shall be provided for 4- and 8-ohm speakers and for
25V, 25VCT, and 70V distributed systems. Additional outputs
shall be provided to feed a booster amp and tape recorder.
A dedicated output shall permit feeding a 600-ohm tele-
phone line using an accessory transformer (Model
WMT

1

A). A Preamp out/power amp in circuit shall be pro-

vided to insert signal processing equipment.
The amplifier shall be rack mountable using an accessory
rack panel kit (GSRPK). It shall be UL and CSA listed and
shall be backed by a 3-year warranty.

50 Spring Street, Ramsey, New Jersey 07446, U.S.A.
20

1

-934-8500 FAX: 20

1

-934-9832

Web Site: www.bogen.com

* Architect and Engineer Specifications are available on CD and
online in a Word document to assist you with preparing your bids.

Отзывы: