17
Placing the unit in sleep mode
This unit can be placed in sleep mode by pressing the power button.
When the unit is in sleep mode, the system is being suspended and it still consumes electricity.
To completely turn off this unit, disconnect the AC cable.
Deleting the setting information
To change the registered user to another, this unit needs to be reset to its factory defaults. Perform the
following steps to reset the unit:
Note(s)
Resetting the unit deletes all setting information including the user setting information, content display
schedules, etc.
1
From the menu, use [Up] and [Down] to select
“System”
ð
“Erase setting data” , then press [OK].
2
The following message will be displayed.
Select “YES” to perform a factory reset.
When using this unit again after a factory reset,
perform the initial setup again by following the
Quick start guide.
