Bodyworx L7800LP, Руководство пользователя

Страница: 14 / 16

-12-
---
CABLE ASSEMBLY
---
1.
START WITH WEIGHT STACK CABLE 2500MM (23)
START BY THREADING END OF THE CABLE WITHOUT THE BALL OVER INTO
PULLEY NO.
1 , OVER PULLEY NO. 2 , DOWN AND AROUND PULLEY NO. 3 IN
FLOATING PULLEY LOCK, UP AND OVER PULLEY NO. 4 DOWN AND ATTACH
TO WEIGHT STACK WITH M12 BOLT AS SHOWN.
2.
CONNECT THE PEC DEC CABLE 2750MM (24)
TAKE PEC DEC CABLE ONE END TO PEC DEC ARM AS PICTURED IN PEC DEC
ASSEMBLY, USING M10*30MM HEX BOLT (59), M10 NUT (65), M10 WASHER (72)
AND M10 NYLON NUT (68) TO SECURE CABLE TO ASSEMBLY, THEN THREAD
THE OTHER END OF CABLE OVER PULLEY NO.
5, DOWN AND AROUND PULLEY
NO. 6, IN PEC DEC PULLEY BLOCK (22) UP AND OVER PULLEY NO. 7 , USING
M10*30MM HEX BOLT (59), M10 NUT (65), M10 WASHER (72) AND M10 NYLON
NUT (68) TO SECURE CABLE TO ASSEMBLY.
3.
START THE BOTTOM CURL BAR CABLE 3010MM (25)
START BY THREADING THE END OF THE CABLE WITHOUT THE BALL UNDER
PULLEY NO.
8 , UNDER PULLEY NO. 9 , UP AND AROUND PULLEY NO. 10 , IN
FLOATING PULLEY BLOCK, DOWN AND UNDER PULLEY NO. 11 , UP AND
AROUND PULLEY NO. 12, IN FLOATING PULLEY LOCK, DOWN ONTO MAIN
BASE 01) USING CHAIN HOOK AND CHAIN TO END OF CABLE. USING 8*45MM
HEX BOLT (63) M8 WASHER (73) AND M8 NLYON NUT (69) TO SECURE
CABLE.AS SHOWN.
4.
START WITH THE LEG PRESS CABLE 5660MM (26)
START BY THREADING THE END OF THE CABLE WITHOUT THE BALL OVER
INTO PULLEY NO.
13 , DOWN AND AROUND PULLEY NO. 14, IN FLOATING
PULLEY LOCK, UP AND AROUND PULLEY NO. 15, IN FLOATING PULLEY LOCK,
INTO UNDER PULLEY NO. 16, INTO AND AROUND PULLEY NO. 17 , INTO FRONT
PULLEY NO. 18 , UP AND OVER PULLEY NO. 19, BACK AND AROUND PULLEY
NO. 20, USING 8*45MM HEX BOLT (63) M8 WASHER (73) AND M8 NLYON NUT
(69) TO SECURE CABLE.AS SHOWN.
NOTE: IF YOU FIND THAT THE CABLES ARE NOT LONG ENOUGH, USE THE
SHORT EXERCISE CHAIN AS AN EXTENSION WITH CHAIN HOOK AS
CONNECTORS.
INSTALL WEIGHT COVER (76) TO TOP CROSS BEAM (10) AND LEFT BASE (03).
SECURE USING M8*15MM BOLTS (64), M8 WASHER (73) AS SHOWN.
ATTACH HAND GRIP (35) TO LAT BAR (30) AND CURL BAR (31).
※ WARNING: MAAKE SURE ALL CABLES DO NOT RUN OUT OF TRACK
FROM ANY OF PULLEYS WHILE YOU ARE IN USE EVERYTIME.