Bodyworx L7750, Руководство пользователя

Страница: 7 / 14

STEP 03
1. PLACE 50*100MM SQUARE CAP (83) ONTO TOP CROSS BEAM (10).
2. ATTACH TOP CROSS BEAM (10) ONTO THE VERTICLE BEAM (09) WITH
M10*70MM BOLT (57), M10 WASHER (72) AND M10 NYLON NUT (68) AND
CONNECT THE GUIDE RODS (02) TO THE TOP CROSS BEAM (10) WITH
M10*25MM BOLT (60) M10 WASHER (72) AS SHOWN.
3. ATTACH PULLEY BLOCK (20) TO THE VERTICLE BEAM (09), USE M8*60MM
BOLT (62) WITH M8 WASHER (73) AND M8 NUTS (69).
4. PLACE 38MM SQUARE CAP (42) ONTO VERTICLE BEAM (09).
-6-