Bodyworx JX740, Руководство пользователя

Страница: 3 / 29

2
2.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed,
including the followings:
Read all instructions before using the treadmill.
DANGER
– To reduce the risk of electric shock:
1. Always unplug this appliance from the electrical outlet immediately after using and
before cleaning.
WARNING
– To reduce the risk of burns, fire, electric shock, or injury to persons:
1. The product should never be left unattended while plugged in. Unplug the product from
the outlet when not in use.
2. Close supervision is necessary when this product is used by or near children, invalids,
or disabled persons.
3. Be sure to use the product only for its intended use as described in this manual. Do not
use any attachment not recommended by the manufacturer in order to avoid any
danger or accidents.
4. Never operate the product if it has a damaged cord or plug, if it is not working properly,
if it has been damaged, or dropped into water. Please return the product to the
service center of seller for examination and repair.
5.
Do not carry this product by the supply cord or use the cord as a handle.
6. Keep the cord away from hot surfaces or ground.
7. Never operate the product with the air vents blocked. Keep the air vents free of lint, hair,
etc.
8. Never drop or insert any objects into any openings.
9.
Do not use or operate outdoors.
10.
Do not operate where aerosol (spray) products are being used or where oxygen is
thin.
11.
Before turning the product power off, turn all controls to the off status then remove
the plug from the outlet.
12.
Connect the product to a properly grounded outlet only.
13. If the treadmill is foldable, when user finishes using the treadmill, the elevation
needs to be back to original position.
14.
When user is using the treadmill, it can not be folded at the same time.
15.
This machine is only intended for household use.
Note
–For the treadmill with folding function, be sure that the elevation is 0 before
folding(To avoid interference of the components).