13
10
STEP 3
Remove the clamp (25) and allen bolt (22) from front post (4). Attach handlebar (5) to
front post (4) and tighten with clamp (25), allen bolt (22), cover for clamp (37) and
T-type knob (21).
Insert hand pulse wires (20) into the grommet (32) and pull out from top bracket. Attach
hand pulse wires (20) and upper computer wire (33) to the computer (6) accordingly.
Tighten with 4 screws (27) which are pre-assembled on the back of computer (6).
4
STEP 4
Attach the cover (12) to sliding tube (13) and tighten with the screw (39) which is
pre-assembled on the sliding tube. Release the nuts under the seat (8), attach the seat
to sliding tube (13) and tighten the nuts.
Insert seat post (7) into main frame (1) through cover for seat post (38). Line up the
holes and secure seat in position with quick release knob (11). The correct height for
seat can be adjusted after the bike is fully assembled.
1
11
7
12
39
7
8
Nut
38
8
13
