BodyTech Fitness MAGNECTIC BIKE, Руководство пользователя

Страница: 10 / 15

9
4. Computer, Handlebar Installation,
Remove four M5x10 Bolts (60) from the Computer (63). Remove bolts with the Multi Hex
Tool with Phillips Screwdriver provided. Connect the Hand Pulse Sensor Wires (66) and
Extension Sensor Wire (56) to the wires that come from the Computer (63). Tuck wires into
the Handlebar Post (59). Attach the Computer (63) onto the top end of the Handlebar Post
(59) with four M5x10 Bolts (60) that were removed. Tighten bolts with the Multi Hex Tool with
Phillips Screwdriver provided
Remove two M8x15 Bolts (57) and two
Ø
16x
Ø
8x1.5 Curve Washers (72) from the
Handlebar Post (59). Remove bolts with the S6 Allen Wrench provided.
Insert the Hand Pulse Sensor Wires (66) into the hole on the Handlebar Post (59) and then
pull them out from the top end of the Handlebar Post (59).
Attach the Handlebar (65) onto the Handlebar Post (59) with two M8x15 Bolts (57) and two
Ø
16x
Ø
8x1.5 Curve Washers (72) that were removed. Tighten bolts with the S6 Allen
Wrench provided.
.