Bodytastic Vertex R22.1, Руководство по сборке

Страница: 26 / 35

2015/2/2 V1.1+V1.1 25

During fitness, if there is no wireless signal detected, windows will show "NO
PULSE" words. If the time is up to 60 seconds, it will enter PAUSE mode.

When PRM is lower than 40, program windows will show figure
『
RPM↑
』
and enter
PAUSE mode after 5 seconds.

HR CONTROL mode only can be used with wireless pulse and the hand grip pulse
is no function under this mode.

During program working, data windows will show below information
：
default figure
is Level 1, press Up
、
Down Key can't modify it.
4.4.6. WATT MODE
：
it is WATT CONTROL MODE
1. Under start/steady window, press WATT, program windows will show
『
WATT
』
,Data
windows moves left and show words
『
PRESS ENTER TO BEGIN PROFILE.
』
2. Press ENTER to modify Target WATT. Data windows moves left and show words
『
ENTER WATT <25-400>
』
, USER can input number 0~9 to input Target WATT, Data
windows will show
『
WATTS= xxx
』
and flash the input value. Press the
number key for modify must be 2~3 numbers(range is 25 ~ 400). Unreasonable value
will auto change to show min or max value, input the reasonable value and press
ENTER to confirm and store it.
3. Press ENTER for time modify, data windows will show words
『
ENTER TIME <10 - 60 >
MINUTOS
』
, (range is10 ~ 60). Program windows show default value
『
10
』
and flash
the value. Press number 0~9 for modify and you must input 2 numbers(range is 10 ~
60). Unreasonable value will auto display default value, input the reasonable value and
press ENTER to confirm the value and start program.
4. After finishing the set of last item's time, press Enter Key and all value start accounting.
The default resistance value is Level 1 and it will change once per minute. When PRM
is lower than 40, program windows will show figure
『
RPM↑
』
and enter PAUSE mode
after 5 seconds.
5. When program finishing or working, press STOP Key and program windows will auto
show original Profile figure, data windows will show below training accounting items for
2 seconds by turns for twice, then program will back to start/steady condition.