31
2014/11/10V1.0+V1.0
program control, 1 virtual reality program ( complex map ),one multiplayer
competition program are included .
All sports and fitness program can use abovementioned multimedia function and
motion record function during exercise.
Parts of sports and fitness program can implement warm-up stage firstly after
starting, skip can be pressed to cancel the program in the process of warm-up.
Parts of sports and fitness program can implement cooling stage automatically
after completing program control target, LEVEL =the reduction of 50% of the
current resistance per minute. The cooling stage can be cancelled by pressing
“skip”.
Lifting: lifting key can be pressed during exercise, the speed will return to zero
slowly, the slope will maintain current angle, and all exercise values will be saved
temporarily for 4 min. Continue key can be pressed within 4 min to recover, the
speed will return to status before lifting; The program can terminate automatically
and return to standby page when pause status exceeds 4 min. Some program
control is based on training target, so lifting function is not enabled.
7.2. Overview of sports and fitness program
QUICK START
After starting the machine up, QUICK START key can be pressed in log in page or general
standby page directly, so as to start quick start program up quickly. As program setting is
skipped, the basic personal data required in calculation procedure of exercise will be
entered into directly (If fit2 go membership is logged in , then membership information can
be used to enter into ) by default value (30 years old, 70 kilo ), including age and weight.
There is no warm-up stage in quick start mode, LEVEL can be adjusted with hands in the
process randomly.
Automatic program
Time Goal
1. The process must be used, matching with the built-in exercise program (Manual, Hill,
Interval, and Random) of the unit.
2. Set time as the exercise objective. Once this time is up, the program will
automatically go into the cool down phase.
Set range: time preset 20 minutes/range 20-99
Distance Goal
1. The process must be used, matching with the built-in exercise program (Manual, Hill,
