32
8. TROUBLESHOOTING
Should any malfunction occur while using the device, check
whether the parameters are set appropriately for therapy, and
adjust the control correctly. Please see the following table:
Malfunction Common Reasons
Countermeasure
No display
The battery is exhausted
Charge in time
No sensation
of stimulation
1. The electrode does not
connect well to the skin.
2. The electrode does not
connect well to the stimulator.
3. The battery is used up.
4. The skin is too dry.
1. Check and re-paste it on skin. 2.
Check the connection. 3. Charge.
4. Wipe the electrode and the skin
with a wet cotton cloth.
No sensation
of stimulation
or weak
stimulation
1. The electrode does not
connect well to the skin.
2. If the connection between
electrode connects well to the
stimulator.
3. The battery is used up.
4. The skin is too dry.
1. Check and re-paste it on skin.
2. Check the connection.
3. Charge.
4. Wipe the electrode and the skin
with a wet cotton cloth.
Automatic
halt in the
treatment
1. The electrode loses connection
with the skin.
2. If the battery is used up.
1. Check and place the electrode
properly on the skin.
2. Charge.
Rash or tickle
on the skin
occurs in the
treatment
1.The treatment time lasts too
long.
2.The electrode does not stick
well to the skin.
3. The interface of the electrodes
is dirty or dry.
4. The skin is sensitive to the
electrode.
1. Do the treatment once a day
and shorten the treatment time.
2. Check and stick the electrode
well.
3. Wipe the electrode with a wet
cotton cloth before use.
4. Check your allergic history.
Please change the sticking place
or shorten the treatment time. If
your skin is over-sensitive, you
should stop the treatment or go to
see a doctor.
7.4 Cleaning the Electrodes Cords:
Clean the electrode cords by wiping them with damp cloth. Coating
them lightly with talcum powder will reduce tangles and prolong
the life.
